Follow these easy steps to get your Zanussi CZX 165 W Refrigerator up and running in no time.
Remove all securing tapes from the refrigerator. Wash the interior with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water) to ensure cleanliness. Avoid using soap or detergents as they may leave an odor. Dry thoroughly.
Ensure that the refrigerator is positioned away from direct sunlight and heat sources such as radiators and cookers. Leave the required space for ventilation as specified in the installation instructions. The appliance should stand upright for 2 hours after positioning to allow the refrigerant to settle.
Plug the refrigerator into a properly installed electrical socket. Ensure that the mains power supply can be easily disconnected; the plug should be accessible. Electrical work should be performed by a qualified electrician if necessary.
Turn the thermostat control knob to a midway position (3-4) to set the desired temperature. Adjust the air circulation slider control, located at the back of the fridge section, to a midway position between 'MIN' and 'MAX'.
Switch on the appliance at the mains supply. The pilot light will illuminate, indicating that the refrigerator is operational. Allow the refrigerator to run for approximately 4 hours to reach the correct temperature before placing food inside.